BKKBL - 37 264F25K SOVAPON TK CTG HF HB
- MSDS: BKKBL
- Manufacturer: VALSPAR CORP
- Product Name: 37 264F25K SOVAPON TK CTG HF HB
- National Stock Number: 8010-00N013017
Product Identification
Product ID:37 264F25K SOVAPON TK CTG HF HB
MSDS Date:08/05/1988
FSC:8010
NIIN:00N013017
MSDS Number: BKKBL
Responsible Party
MINNEAPOLIS, MN 55415
US
Emergency Phone: 800-228-5635
Cage: 06758
Contractor
Telephone: 612-332-7371/888-345-5732
Cage: 23526
Ingredients
METHYL ISOBUTYL CARBINOL
CAS: 108-11-2
RTECS: SA7350000
Fraction By Weight: 5%
OSHA PEL S,25 PPM/40 STEL
ACGIH TLV: S,25 PPM/40STEL;9192
ISOBUTYL ISOBUTYRATE
CAS: 97-85-8
RTECS: NQ5250000
Fraction By Weight: 5%
OSHA PEL N/K
ACGIH TLV: N/K
PROPYLENE GLYCOL MONO PROPYL ETHER
CAS: 1569-01-3
RTECS: UB9351000
Fraction By Weight: 5%
OSHA PEL N/K
ACGIH TLV: N/K
NAPHTHA, MEDIUM ALIPHATIC
CAS: 64742-88-7
Fraction By Weight: 1%
OSHA PEL N/K
ACGIH TLV: N/K
BARIUM SULFATE
CAS: 7727-43-7
RTECS: CR0600000
Fraction By Weight: 10%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 5%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
TALC (CONTAINING NO ASBESTOS)
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 20%
OSHA PEL 2 MG/M3 RDUST
ACGIH TLV: 2 MG/M3 RDUST; 9192
TITANIUM DIOXIDE
CAS: 13463-67-7
RTECS: XR2275000
Fraction By Weight: 15 - 20%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9293
PROPYLENE GLYCOL MONOMETHYL ETHER
CAS: 107-98-2
RTECS: UB7700000
Fraction By Weight: 5%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
Hazards
LD50 LC50 Mixture:N/K .
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION. SKIN: IRRITATION.
INHALATION: HARMFUL IF INHALED. MAY AFFECT THE BRAIN, NERVOUS
SYSTEM OR RESP SYSTEM, CAUSING DIZZ, HDACH, NAUSEA OR RESP IRRIT.
OVEREXPOS TO INGREDIENTS MAY CAUSE N OSE AND THROAT IRRIT, EYE
IRRIT, SKIN IRRIT. CHRONIC: REPORTS HAVE ASSOC RPTD/PRLG OVEREXPOS
TO SOLVENTS W/PERM (SUPP)
Effects of Overexposure:(SEE HEALTH HAZARDS)
Medical Cond Aggravated by Exposure:ANY RESPIRATORY OR SKIN CONDITION.
First Aid
First Aid:EYE: IMMEDIATELY FLUSH WITH PLENTY OF WATER FOR AT LEAST 15
MINUTES. GET MEDICAL ATTENTION. SKIN: WASH WITH SOAP AND WATER.
INHALATION: REMOVE TO FRESH AIR. IF BREATHING HAS STOPPED, USE
MOUTH-TO-MOUT H RESUSCITATION AND GET MEDICAL ATTENTION. INGESTION:
N/K .
Fire Fighting
Flash Point:101F,38C
Lower Limits:1.00
Upper Limits:17.00
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, FOAM, AND/OR WATER
FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . CONTAINERS EXPOSED TO FIRE SHOULD BE KEPT
COOL WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:VENTILATE AREA. AVOID BREATHING OF VAPORS. USE
SCBA FOR LARGE SPILLS IN A CONFINED AREA. WIPE UP OR ABSORB ON
SUITABLE MATERIAL AND SHOVEL UP. AVOID CONTACT WITH EYES.
Neutralizing Agent:N/K .
Handling
Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAMES. KEEP CONTAINER CLOSED WHEN NOT IN USE. DO NOT STORE ABOVE
120F. EMPTY CONTR MAY CONTAIN EXPLOSIVE RESIDUE.
Other Precautions:DO NOT CUT, PUNCTURE OR WELD ON OR NEAR CONTAINER.
ALL LABEL WARNINGS MUST BE OBSERVED UNTIL THE CONTAINER HAS BEEN
CLEANED OR RECONDITIONED.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR FOR EXPOSURE OF
CONCERN .
Ventilation:VENTILATION APPROPRIATE FOR CONDITIONS OF USE.CONSULT
INDUSTRIAL HYGIENIST/SAFETY SPECIALIST FOR SPECIFIC GUIDANCE
Protective Gloves:USUAL HAND PROTECTION FOR PAINTING.
Eye Protection:CHEM WORKER GOGGLES. MAY ADD FULL (SUPP)
Other Protective Equipment:USUAL CLOTHING FOR PAINT OPERATIONS.
Work Hygienic Practices:N/K .
Supplemental Safety and Health
HLTH HAZ: CHRONIC: BRAIN & NERVOUS SYSTEM DMG. DELIBERATELY INHALING
THE CONTENTS MAY BE HARMFUL OR FATAL. CONTAINS INGREDIENTS WHICH
MAY CAUSE LUNG IRRITATION, LIVER DAMAGE, KIDNEY DAMAGE. EYE PROT:
LENGTH FACE SHIELD TO GOGGLES .
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:248F,120C
Melt/Freeze Pt:M.P/F.P Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:13 MM HG
Vapor Density:5.9(AIR=1)
Spec Gravity:1.58
Evaporation Rate & Reference:.7 (BUTYL ACETATE=1)
Solubility in Water:NO
Appearance and Odor:NORMAL FOR A COATING PRODUCT.
Percent Volatiles by Volume:46.34
Corrosion Rate:
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:SILICON DIOXIDE, CARBON DIOXIDE,
CARBON MONOXIDE, METAL OXIDES, SUFUR OXIDES.
Disposal
Waste Disposal Methods:DISPOSE IN CHEMICAL DISPOSAL AREA OR IN A MANNER
THAT COMPLIES WITH LOCAL, STATE, AND FEDERAL REGULATIONS. DO NOT
INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.